ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Stalling/Poor Performance|Page 2162 > < Engine - Stalling/Poor Performance
Page 2
background image

Figure 2 - Air Cleaner

INSPECTION

1.

Remove the air cleaner cover, air cleaner inlet tube adaptor and air inlet tube from vehicle, as shown (Figure 2).

(See Shop Manual Section 24-41-6, Figure 5 for removal instructions.)

Figure 3 - Inspection Procedure

2.

Inspect for improper installation of the insulation through the hole in the apron (i.e., if insulation can be seen through hole it will cause blockage)
as shown in Figure 3.

3.

If there is no blockage, (i.e. no insulation can be seen), replace the air inlet tube, air cleaner tube adaptor and air cleaner cover.

CORRECTION

1.

Remove the fender splash shield.

Engine - Stalling/Poor Performance|Page 2162 > < Engine - Stalling/Poor Performance