Thunderbird L4-140 2.3L SOHC Turbo (1984)
Figure 6
4.
Remove the upper left bolt (N605800-S100) on bracket (19D624) (Figure 5) and install new rear studded brace (E4SZ-2889-C) with the removed
bolt (Figure 6) and hand tighten.
5.
Install new front brace (E4SZ-2888-A) by inserting the stud attached to new rear studded brace (E4SZ- 2889-C) through the hole provided for it in
the new front brace. Install and hand tighten the two bolts (N605799-S100) removed in Step 2 to attach the new front brace to the engine cylinder
head. Loosely install screw and washer assembly (N602742-S100) removed in Step 2 to attach existing bracket (19D625) to the new front brace
(E4SZ-2888-A) (Figure 6).
6.
Install new brace (E5SZ-2889-D) by first placing spacer (390337-S) behind the hole in the brace and inserting bolt (N605801-S100) through both
parts, then fasten to existing hole in the cylinder head between the first and second spark plug. Place other end over stud which protrudes through
front brace assembly (E4SZ-2888-A) and secure with nut (Figure 6) and hand tighten both ends.
