ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Hesitation on Initial Acceleration|Page 362 > < Air/Fuel Mixture|Adjustments|Page 353
Page 1
background image

Idle Speed: Customer Interest
Engine - Hesitation on Initial Acceleration

Article No:
82-14-14

07/16/82

Hesitation on Initial Acceleration (3.8L Engine)

Ford
1982 T-bird, Granada

Lincoln-mercury
1982 XR7, Cougar

Calibrations: 2-14C, 2-14J, 2-14E, 2-14W

Warning:

This Modification Is Authorized Only For The Listed Engines. Performing This Modification On Other Engine Calibrations Is Unauthorized And
Could Create Liability Under Applicable Federal Or Local Laws.

Vehicles which exhibit stumbles or hesitation on initial acceleration can be serviced by installing a new accelerator pump rod and diaphragm assemblies.

Calibrations 2-14C, 2-14J - T-Bird/XR7

^

Install a new service accelerator pump rod/swivel assembly E1PZ-9F687-A.

^

Install a new accelerator pump diaphragm assembly E2AZ-9B559-A

Calibration 2-14E - T-Bird(XR7)

^

Install a new accelerator pump rod/swivel assembly E1PZ-9F687-A.

Calibration (Altitude) 2-14W - Granada/Cougar

^

Install a new accelerator pump rod/swivel assembly E1PZ-9F687-C.

^

Check/adjust carb idle speeds, if necessary.

^

Add a Modification decal denoting the above changes.

Obtain an Authorized Modifications decal and list the date, dealer number and alterations performed as shown. Select a prominent place adjacent to the
Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it with
a clear plastic decal shield.

OTHER APPLICABLE ARTICLES: None 

PARTS BLOCK

Engine - Hesitation on Initial Acceleration|Page 362 > < Air/Fuel Mixture|Adjustments|Page 353