Thunderbird V6-232 3.8L (1982)
Figure 7
5.
Install the new harness assemblies to the new altitude compensator, carburetor, air cleaner and the vacuum tree (see Figure 7).
6.
Cap the "tee" on the vacuum harness if the added connection is not required.
1982 2.3L Installation Procedure:
1.
Remove the altitude compensator from the left apron.
2.
Drill a 7 mm hole 65 mm to the rear of the front mounting hole. The new hole should be placed so that the compensator will mount vertically with
the 1/4 inch nipple on top.
3.
Install the compensator using the two nuts.
