Thunderbird V6-232 3.8L SC (1989)
6.
Blow off the area with compressed air to remove any dirt and sanding residue.
7.
Tack wipe to remove any contamination.
8.
Wipe the area with a suitable anti-static wash solution.
9.
Wipe the area with a wax and grease remover using a lint-free cloth.
10.
Tack wipe to remove any remaining contamination.
11.
Apply a clear sealer to the unpainted area.
12.
Apply primer/filler to the unpainted area and feather into the existing paint.
13.
Apply top coat (body color) where necessary.
14.
Paint the black rubstrip strip with black primer only.
The various paint materials, cleaner, sealers and primer-fillers listed above may be purchased locally from suppliers such as AKZO-Sikkens, BASF
Corporation, PPG, Dupont and Sherwin Williams.
Figure 2
A list of suppliers and materials required (alternates) is shown in Figure 2.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES:
91-8-3, 04/17/91
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
106000, 190000
Technical Service Bulletin # 9192
Date: 910501
Paint - Paint Blistering or Peeling Off Bumper Covers
Article No.
91-9-2
05/01/91
PAINT - BLISTERING OR PEELING OFF BUMPER COVERS - REPAIR TIPS
FORD:
1989-91 THUNDERBIRD
