Thunderbird V6-232 3.8L SC (1989)
Wheel Hub: Service and Repair
NOTE: There are two approved methods for removing the hub from the bearing. Both methods are outlined.
Removal
1. Remove knuckle and hub assembly from vehicle as outlined.
2. Place knuckle and hub assembly in a vise.
NOTE: On drum brakes, remove shoe and linings, springs, and adjuster from backing plate. Remove four screws that retain the backing plate to the
knuckle.
Method One
A. Position 3-Jaw Puller D88L-1 037-A and Step Plate D8OL-630-5 or equivalent, on the knuckle and press out the hub from the knuckle assembly.
Method Two
