ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air By Pass Valve - Cleaning/Replacement Service Tips|Page 4136 > < Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 4131
Page 1
background image

Idle Speed Control Bypass Air (ISC-BPA) Valve: All Technical Service Bulletins
Air By Pass Valve - Cleaning/Replacement Service Tips

FUEL SYSTEM-3.8L EFI-AIR BY-PASS VALVECLEANING AND REPLACEMENT SERVICE TIPS

Article No. 89-13-8

FORD:

1989 TAURUS, THUNDERBIRD

LINCOLN-MERCURY: 1989 CONTINENTAL, COUGAR, SABLE

ISSUE:

Two different types of air by-pass valves have been released for use on 3.8L EFI engines. One type of valve has a silver metal housing and
the other type has a black plastic housing. Both of the valves function in the same manner. Air by-pass valves that have a black plastic
housing cannot be cleaned, they must be replaced. Valves that have silver metal housings can be cleaned.

ACTION:

If cleaning or replacement of an air by-pass valve is required, refer to the following supplemental service information. Also refer to the
appropriate Car Shop Manual, Section 24-11 for service details.

Figure 1

Figure 2

Air By Pass Valve - Cleaning/Replacement Service Tips|Page 4136 > < Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 4131