ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Seat Belt Warning Lamp - Stays ON With Belt Buckled|Page 7468 > < Seat Belt Warning Lamp - Stays ON With Belt Buckled
Page 2
background image

installed.

ACTION:

Disconnect passive restraint control assembly connectors and install a jumper wire assembly. Refer to the following procedure for service
details.

1.

Remove the left hand interior trim panel in the luggage compartment. Refer to the 1989 Thunderbird/Cougar Shop Manual, Page 45-03-05.

2.

Disconnect both passive restraint control assembly connectors and tape them back to the wire harness, Figure 1.

3.

Install a jumper wire assembly (E9SZ-14K691-A), Figure 1.

4.

Reinstall the luggage compartment trim panel.

PART NUMBER

PART NAME

CLASS

E9SZ-14K691-A

Jumper Wire Assembly

C

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Safety Restraint Warranty Coverage

OPERATION      DESCRIPTION

TIME

891401A

Install Jumper Wire

0.5 Hr.

DEALER CODING 
BASIC PART NO.  CONDITION CODE

14A504

79

OASIS CODES:

1051, 2300, 2500

Seat Belt Warning Lamp - Stays ON With Belt Buckled|Page 7468 > < Seat Belt Warning Lamp - Stays ON With Belt Buckled