Seat Belt Warning Lamp - Belt Buckled But Lamp Stays ON
Seat Belt Buckle Switch: Customer Interest
Seat Belt Warning Lamp - Stays ON With Belt Buckled
LAMP-WARNING STAYS "ON" WHEN SAFETY BELT IS BUCKLED-CANADIAN VEHICLES
SAFETY BELT-WARNING LAMP STAYS "ON" WHEN SAFETY BELT IS BUCKLED-CANADIAN VEHICLES
Article No. 89-14-1
Figure 1
FORD:
1989 THUNDERBIRD
LINCOLN-MERCURY: 1989 COUGAR
ISSUE:
A safety belt warning lamp that stays "on" even though the safety belt is buckled may be caused by the passive restraint control assembly
connectors. The two connectors may have been installed into the control assembly and not taped back to the wire harness on Canadian units
without the motorized passive restraint system. Also, the jumper wire assembly to make sure of proper warning lamp/chime operation was not
