Thunderbird V6-232 3.8L SC (1989)
A. Position Rear Hub Remover T89P-1 225-AH or equivalent between the knuckle and the backing plate.
B. Assemble Hub Remover/Replacer T81 P-il 04-C and Step Plate D8OL-630-5 or equivalent.
C. With forcing nut below the crossbar, hold forcing screw and turn forcing nut to remove hub.
3. Remove the backing plate.
4. Remove bearing retainer snap ring.
5. Place knuckle and bearing assembly on a press bed using Hub Support T89P-1 104-A and Bearing Remover T83P-1 1 04-AH2 or equivalent, and
press bearing out of knuckle assembly.
