Thunderbird V6-232 3.8L SC (1989)
15.
Install vent house, Figure 13.
16.
Position new axle housing cover retaining bolts.
a.
Place the service identification tag in the 12 o'clock position.
b.
Tighten the bolts to 27-37 N-m (20-27 lb.ft.).
17.
Install the rear axle differential rear insulator-to-crossmember bolts, Figure 15.
a.
Tighten bolts to 108-136 N-m. (80-100 lb.ft.).
b.
Fill the rear axle housing with specified rear axle lubricant to 1/4" (6.35 mm) below bottom of filler hole.
