Thunderbird V6-232 3.8L SC (1989)
Axle
18. Check inboard driveshaft bearing retainer circlip engagement by attempting to pull inboard CV joint stub shaft pilot bearing housing from axle. If
driveshaft bearing retainer circlip is not seated, push CV joint in until driveshaft bearing retainer circlip is fully engaged in differential side gear.
19. Install wheel and tire assembly. Tighten wheel lug nuts to 115-142 Nm (85-105 ft lb).
20. Lower vehicle.
21. Tighten rear axle wheel hub retainer to 340 Nm (251 ft lb).
22. Install wheel hub cap.