Thunderbird V6-232 3.8L SC (1989)
FIGURE 2 - Control Assembly Location
REMOVAL AND INSTALLATION
Control Assembly
Remove knob from control lever. Remove applique. Remove screws retaining the climate control head to the instrument panel and remove the climate
control head. Remove control assembly from the climate control head assembly (Fig. 2).
Window
Disconnect wire leads at each end of the glass (Fig. 3). Remove window. Refer to Section 43-11.
MAJOR SERVICE OPERATIONS
Grid Wire Repair
NOTE:
A single break or any breaks that total more than 25 mm (1 inch) in one grid cannot be repaired. The window must be replaced. For breaks less
than 25 mm (1 inch) long, use the following procedure:
NOTE:
If the first layer of the rear window grid (brown color) is damaged or missing, it will be necessary to apply brown Acrylic Lacquer Touch-Up
Paint AL81-5477-B (ESR-M2P100-B) or equivalent on the glass prior to applying the silver Grid Repair Compound D8AZ-19562- A
(ESB-M4J58-A) or equivalent.
Continental - Mark VII - Thunderbird/Cougar - Mustang