Thunderbird V6-232 3.8L SC (1989)
Replace the wiper motor with a revised wiper motor and use a Windshield Wiper Motor Service Kit to complete the installation. Refer to the Application
Chart listed in this article for the proper application. Follow the detailed instructions included in the service kit.
1.
Inspect the vehicle to see if the new Wiper Motor (-17508-) is already installed. If so, the latest level of wiring is already installed and the Wiper
Motor Wiring Kit (-14A411-) is not required.
2.
Install a new Wiper Motor Assembly. Refer to appropriate Service Manual for installation details.
3.
Use the Wiper Motor Wiring Kit (-14A411-) to complete the installation. The Wiring Kit (-14A411-) consists of:
^
One (1) Wiring and Connector Assembly
^
Seven (7) 5/16" (8 mm) Heat Shrink Tubing - 2" (51 mm) long
^
One (1) 37/63 (lead/tin) Solder 0.032" (0.80 mm) diameter x 12" (305 mm) long
^
One (1) Adhesive Label
^
Instruction Sheets
Not included in the kit is the Wiper Motor (-17508-).
Parts Block
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 94-11-20, 95-4-6
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 202000