Thunderbird V8-281 4.6L SOHC (1994)
3. Carefully rotate caliper assembly over brake rotor. Ensure brake pads and anti-rattle springs are properly positioned.
4. Apply suitable thread sealer and locking compound to pinch bolt threads. Install and tighten pinch bolts, while holding slider pin in position with
suitable open end wrench.
5. Position parking brake cable to lever, then install retaining clip.
6. Position brake hose and bracket to shock unit bracket and install attaching bolt.
7. Install wheel and tire assembly, then lower vehicle.
8. Cycle brake pedal several times to position brake pads and caliper piston.
