Thunderbird V8-281 4.6L SOHC (1994)
5.
Inspect the foam evaporator strip seals for proper positioning (Figure 1).
6.
The seals are positioned on the blower wheel area as marked. There should be no gaps at either end of the seals. Witness marks should be present
along the entire length of the seals. If no marks are present then the seals need to be repositioned to provide a better seal. Wipe out any excess
moisture and reinstall evaporator core and case assembly.
7.
Verify the repair.
DIAGNOSTIC TIPS
THUNDERBIRD/COUGAR
The first thing to do when repairing a water leak is to determine the root cause of the leak. Ford has noted a number of different locations where water
leak issues can arise on the Thunderbird/Cougar. Refer to the following list when addressing a water leak concern. Water may come from the outside of
the vehicle as well as the evaporator case. Always check the evaporator drain for blockage prior to performing any of these steps. The following is a list
of areas where a water leak is possible:
1.
Water dripping from the floor ducts when the A/C is operating on vehicles built Job 1, 1989 through 10/15/93 are most likely exhibiting a
