Thunderbird V8-281 4.6L SOHC (1994)
Manual Lever Position Switch: Adjustments
1. Remove nut securing manual control lever to manual lever position sensor.
2. Turn manual control lever to neutral position.
3. Loosen two Manual Lever Position sensor (MLP) sensor retaining bolts.
4. Align MLP slots using Manual Lever Position Sensor Alignment Tool T93P-70010-A.
5. Tighten retaining bolts to 9-12 Nm (7-9 ft lb).
6. Install nut retaining manual control lever to MLP and tighten to 16-22 Nm (12-16 ft lb).
