ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Control Module HVAC > < A/C - Lack of Cooling From Driver/Passenger Vents|Page 6557

Thunderbird V8-3.9L VIN A (2002)

Page 2
background image

6. Disconnect the two connectors.

7. Remove the four screws (two on each side of the control assembly) and remove the dual automatic temperature control assembly.

NOTE:  The control assembly has three pins at the top of the bezel assembly which pilot in the bottom of the radio bezel. Use care when removing
the control assembly.

INSTALLATION

1. To install, reverse the removal procedure.

NOTE:  If installing a new dual automatic temperature control module, it is necessary to configure the control.

Control Module HVAC > < A/C - Lack of Cooling From Driver/Passenger Vents|Page 6557