ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine Controls - Cold Engine Flooding/Hard Start|Page 3319 > < Engine Controls - Cold Engine Flooding/Hard Start
Page 2
background image

1.

With the New Generation Star (NGS) tester and the latest level Diagnostic Card (Red), use the following steps to obtain the PCM part number:

a.

Enter the Model Year and Engine Displacement of the vehicle.

b.

Select Diagnostic Data Link.

c.

Select Powertrain Control Module.

d.

Write down the PCM part number

2.

Check if the PCM part number is listed in the chart found in Figure 1.

3.

All 2000 and some 2001 model year vehicles will have a PCM included in the list. If the PCM part IS included in the list, refer to either "V6
Vehicles Requiring a New PCM" or "V8 Vehicles Requiring a New PCM" for the repair procedure.

Engine Controls - Cold Engine Flooding/Hard Start|Page 3319 > < Engine Controls - Cold Engine Flooding/Hard Start