ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wheel Bearing > < Aluminum Wheels - Wear/Corrosion Damage
Page 1
background image

Wheels: All Technical Service Bulletins
Cast Aluminum Wheels - Paint Service

Article No. 84-4-16

WHEELS - CAST ALUMINUM - PAINT SERVICE

FORD 1984 THUNDERBIRD FILA SERIES

The 1984 Thunderbird Fila Series vehicles are equipped with painted cast aluminum wheels. The paint used on these wheels is Light Pastel Charcoal,
code 1M which was previously used as body color on many 1983 models.

In the event of minor paint damage where bare metal is not exposed, the paint can be serviced with Ford touchup paint, Code 1M-AL81-5683-B, Brush
(1/2 oz.) or AL81-5683-H, Spray Can (5 oz.).

If the damage has exposed the metal, additional steps are required.

1.

Clean the surface with wax and grease remover.

2.

Sand all loose paint from the wheel.

3.

Sand bare aluminum and undamaged paint with 400 sandpaper.

4.

Clean the surface again with wax and grease remover.

5.

Spray 2 thin coats of Zinc Phosphate, such as R-M 834 or equivalent, following label instructions on the container.

NOTE:

If using Zinc Phosphate material without an acid metal prep additive, it is necessary to metal prep the bare metal before applying the
Zinc Phosphate.

6.

Apply the color coat.

PART NUMBER

PART NAME

CLASS

AL81-5683-B

Brush Touch-up (1/2 oz.)

B

AL81-5683-H

Spray Touch-up (5 oz.)

B

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
Operation

Labor

Misc.

Paint

Number

Hours

Material

Quantity

P-52

one

0.7

1.25

1/10 quart

each additional

0.4

.75

1/10 quart

DLR. CODING: Basic Part No. 1007
Code:

As applicable

Wheel Bearing > < Aluminum Wheels - Wear/Corrosion Damage