Thunderbird V8-302 5.0L HO (1992)
e.
Apply a generous bead of RTV Silicone Sealant to the evaporator tube seal as shown in Figure 4.
f.
Reinstall the evaporator tube seal being careful to make sure the RTV seals around the entire perimeter of the seal.
9.
Apply a bead of RTV Silicone Sealant around the perimeter of the seal where it meets the case.
h
Allow the RTV to fully cure before reinstalling the case. Take care not to disturb the seal during installation of the case.
3.
Diagnosis # 2c. Heater core cover seal.
