ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Driver/Vehicle Information Display > < Door Ajar Diodes|Page 6304
Page 1
background image

Door Switch: Service and Repair

REMOVAL and INSTALLATION

1. Remove connector at switch.
2. Using an ohmmeter such as Rotunda Digital Volt-Ohmmeter 007-00001 or an equivalent, probe between switch terminal and ground (latch).
3. With door in latched (fully closed) position, switch should be open.
4. With door open, switch must be closed.

Driver/Vehicle Information Display > < Door Ajar Diodes|Page 6304