Thunderbird V8-302 5.0L HO (1992)
REMOVAL and INSTALLATION
1. Remove scuff plate.
2. Remove bolt retaining retractor to sill.
3. Disconnect chime warning indicator lamp and remove retractor.
4. To install, reverse Removal procedure. Tighten retaining bolt to 30-40 Nm (23-29 lb-ft).
5. Cycle retractor and check for proper operation.
Shoulder Belt Retractor Switch
REMOVAL and INSTALLATION
1. Disconnect switch at connector attached to bracket on inboard side of driver's side seat track.
2. Using an ohmmeter, such as Rotunda Digital Volt-Ohmmeter 007-00001 or equivalent, set to 200 ohms and probe across switch connector
terminals.
