Thunderbird V8-302 5.0L HO (1992)
Seat Belt Retractor Limit Switch: Service and Repair
REMOVAL and INSTALLATION
1. Disconnect switch from wiring harness.
2. Using an ohmmeter such as Rotunda Digital Volt-Ohmmeter 007-00001 or equivalent, probe across switch terminals.
NOTE: Switch is normally closed when plunger is in tree (extended) position. Switch must open when plunger is depressed.
3. Remove Torx(r) bolt and move spacer downward. This will allow limit switch removal.
4. To install, reverse Removal procedure.
