Thunderbird V8-302 5.0L HO (1992)
Installation
1. Place knuckle assembly on press bed and position bearing in the bearing bore of the knuckle.
2. Using Bearing Installer T86P-1 1 04-A3 or equivalent, press the bearing into the knuckle.
3. Install bearing retainer snap ring.
4. Position the backing plate on the knuckle. Install four retaining bolts and tighten to 61-81 Nm (45-59 lb-ft).
5. Place knuckle assembly on the Hub Support T89P-1 104-A or equivalent and position on press bed plate