ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid - Differential > < Front Seat - Feels Loose|Page 3675
Page 7
background image

BE SURE TO RECORD THE TRACK'S JULIAN BUILD DATE CODE, WHICH IS ALWAYS SHOWN ON THE FRONT INBOARD SIDE OF
THE INBOARD TRACK ASSEMBLY (SEE FIGURE 2), ON THE 1863 WARRANTY FORM.

8.

Inspect the new replacement track assembly to see if the required track clips (F3LY-63618B26-A) were previously installed. If the track clips were
not installed, perform Steps 3 and 4 of Type "B" Procedure.

9.

Install the complete seat and track assembly in the vehicle.

NOTE:
ENSURE THE SEAT TRACK-TO-FLOOR ATTACHMENTS ARE TORQUED AS REQUIRED IN STEP 1 OF TYPE "B" PROCEDURE.

10.

Install the track covers previously removed.

11.

Verify the seat movement concern has been corrected.

TYPE "C" - BOTH LATERAL (SIDE-TO-SIDE) AND FORE /AFT (BACK-AND-FORTH) SEAT MOVEMENT

1.

Refer to procedures "A" and "B" as required.

OTHER APPLICABLE ARTICLES: NONE

SUPERSEDES: 91-15-2

WARRANTY STATUS:
Eligible Under Bumper To Bumper For 1992 Models, Basic Warranty Coverage For All Other Models

DEALER CODING 
BASIC PART NO. 

CONDITION CODE

7061710

33

OASIS CODES: 101000

Fluid - Differential > < Front Seat - Feels Loose|Page 3675