Thunderbird V8-4.6L VIN W (1997)
Antenna - Keyless Entry: Service and Repair
REMOVAL
NOTE: This vehicle uses an alarm and lock system antenna which is incorporated into the wiring harness running from the electronic door lock control
processor to the heated back window feed wiring. Do not remove the existing alarm and lock system antenna from the wiring harness.
1. Disconnect alarm and lock system antenna connector from electronic door lock control processor and tape securely out of the way.
2. Connect new alarm and lock system antenna to electronic door lock control processor.
INSTALLATION
1. Install new alarm and lock system antenna into vehicle, taping along wire harness path followed by old alarm and lock system antenna.
