Thunderbird V8-4.6L VIN W (1997)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect speed control cable fitting from throttle body by pulling lever arm up and off.
2. Raise vehicle.
3. Remove LH front wheel and front fender splash shield.
4. Disconnect harness connector at speed control servo.
5. Remove two screws retaining speed control servo to vehicle.
6. Lower vehicle.
7. Remove speed control cable cap from speed control servo by pressing cap locking arm and rotating speed control cable cap counterclockwise.
8. Remove speed control cable slug from speed control servo pulley. Gently push actuator cable slug past retaining spring using a small screwdriver.