Thunderbird V8-4.6L VIN W (1997)
39. Install LH ignition coil and ignition wires as an assembly.
40. Position and install power steering oil reservoir.
41. Connect both ignition coils and camshaft position sensor.
42. Connect ignition wires to spark plugs and install brackets onto valve cover studs.
43. Install drive belt.
44. Connect fuel lines.
45. Install cooling fan motor/fan blade and fan shroud assembly. Fill cooling system.
46. Install air cleaner outlet tube.
47. Connect battery ground cable.
48. Start engine and check for leaks.
49. Check and add oil as needed.