ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Pressure Regulating Solenoid, A/T|Removal|Page 5400 > < Electrical Specifications|Page 5397
Page 1
background image

Pressure Regulating Solenoid: Service and Repair
Removal

1. Disconnect the battery ground cable. 

NOTE:  When the battery has been disconnected or reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module
(PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

2. Raise vehicle on a hoist.
3. Drain transmission fluid.

4. Remove 14 pan retaining bolts, transmission pan and pan to case gasket.

5. Remove pan magnet. Clean transmission pan and pan magnet.

6. Using both hands, remove filter by pulling downward.

CAUTION:  If installing a new filter, and grommet remains in the main control bore, carefully use a small screwdriver to remove the grommet.

Pressure Regulating Solenoid, A/T|Removal|Page 5400 > < Electrical Specifications|Page 5397