Thunderbird V8-4.6L VIN W (1997)
Use care not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and grommet. The filter may be reused if no
excessive contamination is present.
7. Grasp connector at each solenoid or sensor and pull straight out to disconnect.
CAUTION: Do not pull on wires. This may damage wires or connector and could result in a transmission concern. If required, carefully pry up
on locking tab and disconnect the connector.
8. Remove one bolt retaining manual control valve detent lever spring to the main control valve body.
9. Remove electronic pressure control (EPC) solenoid bracket retaining bolt. Remove bracket.