ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Cable – Handbrake – Replace (12 675 0) > < Handbrake – Adjust (12 662 0)
Primary Cable – Handbrake – Remove and Install (12 673 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove
1. Release the handbrake lever.

2. Detach the primary cable from the handbrake lever.
   Remove the spring clip and clevis pin.

3. Detach the primary cable from the cable equaliser.
1. Remove the spring clip and clevis pin.
2. Remove the return spring from the equaliser.
4. Remove the primary cable.
Install
5. Refit the components in the reverse order.
6. If necessary adjust the handbrake as described in Operation No. 12 662 0.

Rear Cable – Handbrake – Replace (12 675 0) > < Handbrake – Adjust (12 662 0)