ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Steering Wheel – Remove and Install (13 524 0) > < 213-01 Manual Steering|Description and Operation

Transit 1995 (08.1994-07.2000)

Steering Wheel – Centralise (13 523 3)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Centralise
1. Drive the vehicle in a straight line on a level road surface, note the angular position (misalignment) of the steering wheel spokes.
2. Raise the vehicle.

3. Mark the position of the track rods and track rod ends.

4. Slacken both the track rod end locknuts and release the bellows outer clips.

5. Rotate both the track rods in the same direction approximately 30° for every 1° of steering wheel misalignment angular error.
• If the steering wheel has an anti‐clockwise angular error, both track rods must be rotated clockwise, when viewed from the left hand side of the vehicle.
• If the steering wheel has a clockwise angular error, both track rods must be rotated anti‐clockwise when viewed from the left‐hand side of the vehicle.
6. Check the front wheel alignment as described in Operation Nos. 14 111 0 and 14 111 3.

7. Tighten the track rod end locknuts.
8. Secure the bellows with new clips and lower the vehicle.

Steering Wheel – Remove and Install (13 524 0) > < 213-01 Manual Steering|Description and Operation