ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Cover And Pad Assembly - Cushion - Rear Seat (17 Seat Bus) - Remove And Install (40 124 0) > < Seat Assembly - Front Bucket (Low Series) - Remove And Install (40 100 0)

Transit 1995 (08.1994-07.2000)

Cover And Pad Assembly - Backrest - Rear Seat (17 Seat Bus) - Remove And Install (40 127 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

NOTE:

The following procedure has been carried out on a triple seat. Although the procedure is the same for single and dual seats but with reduced complexity, this procedure should be used.
1. Remove the rear seat belt(s). Refer to Operation 40 240 0).

2. Detach the seat cover retaining plates from the backrest frame.
1. Turn each retaining plate through 90 degrees.
2. Push the retaining plate through the backrest foam.

3. Detach the seat cover from the seat backrest frame.
   Detach the seat cover retaining strips from the seat frame.

4. Remove the seat cover.

5. Remove the backrest foam pad from the seat frame.
   Detach each of the glued edges from the seat frame.
Install
6. Refit the components in reverse order.

Cover And Pad Assembly - Cushion - Rear Seat (17 Seat Bus) - Remove And Install (40 124 0) > < Seat Assembly - Front Bucket (Low Series) - Remove And Install (40 100 0)