ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Seat Assembly - Front Bench (Fixed Seat) - Remove And Install (40 103 0) > < Seat Assembly - Rear (Fixed Seat) - Remove And Install (40 120 0)

Transit 1995 (08.1994-07.2000)

Seat Assembly - Rear (Single 17 Seat Bus) - Remove And Install (40 120 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

NOTE:

The backrest anchor on rear row seats is solid (see inset) whereas the inboard mounted seats use a webbing anchor (right‐hand seat shown).
1. Detach the single seat backrest anchor.
1. Remove the cover.
2. Remove the retaining bolt.

NOTE:

The seat shown is mounted over the rear wheel arch. In this position one of the outer rear seat mountings is repositioned and retained by a bolt, in place of the Torx type floor retaining bolt.
2. Remove the single seat.
   Remove the four Torx retaining bolts.
Install
3. Refit the components in the reverse order.

Seat Assembly - Front Bench (Fixed Seat) - Remove And Install (40 103 0) > < Seat Assembly - Rear (Fixed Seat) - Remove And Install (40 120 0)