ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Belt And Stalk - Front Seat (Tipping Bench Outer) - Remove And Install (40 212 0) > < Belt And Stalk - Front Seat (Fixed Bench Seat) - Remove And Install (40 212 0)

Transit 1995 (08.1994-07.2000)

Belt and Stalk - Rear Seat (Fold Fold Seat) - Remove and Install (40 240 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

CAUTION:

Note the position of spacers and paper washers. Make sure these are correctly positioned for installation.
1. Fold the seat forward to its first position.
2. Remove the rear load space trim panel (refer to Operation No. 43 746 0).

3. Remove the seat belt stalk.
   Remove the Torx retaining screw.

4. Detach the seat belt lower anchor.
   Remove the Torx retaining screw from the wheel housing.

5. Detach the upper C‐pillar upper anchor.
1. Remove the upper anchor cover.
2. Remove the Torx retaining screw.

6. Remove the seat belt assembly.
   Remove the Torx retaining screw.
Install

CAUTION:

When installing seat belts make sure the webbing is correctly routed and not twisted. Make sure the seat belt operates correctly without restriction.
7. Refit the components in reverse order.

Belt And Stalk - Front Seat (Tipping Bench Outer) - Remove And Install (40 212 0) > < Belt And Stalk - Front Seat (Fixed Bench Seat) - Remove And Install (40 212 0)