Note the position of the spacers and paper washers. Make sure these are correctly positioned for installation.
1. Remove the floor mounted seat belt stalk.
Remove the Torx retaining screw.
2. Detach the triple seat assembly from the floor.
Remove the nine Torx retaining screws.
3. Detach the seat backrest anchor.
Remove the Torx retaining screw.
4. Detach the upper seat belt anchor.
1. Remove the cover.
2. Remove the Torx retaining screw.
5. Detach the lower seat belt anchor.
Remove the Torx retaining screw.
6. Remove the seat belt assembly.
Remove the Torx retaining screw.
Install
CAUTION:
When installing the seat belt make sure the webbing is correctly routed and not twisted. Make sure the seat belt operates correctly without restriction.