ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

540-03 Air Bags > < Belt And Stalk - Rear Seat - Left Or Right (17 Seat Bus) - Remove And Install (40 240 0)
Belt - Rear Seat (Centre Three Point) - Remove And Install (40 248 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

CAUTION:

Note the position of spacers and paper washers. Make sure these are correctly positioned for installation.

1. Detach the upper seat belt anchor.
1. Remove the seat belt upper anchor cover.
2. Remove the Torx retaining screw.

2. Detach the upper bolster cover.
   Lift the bolster cover from the seat.

3. Remove the seat bolster.
   Lift the bolster to the detach retainers.

4. Detach the lower seat belt webbing anchor screw.
   Remove the Torx retaining screw.

5. Remove the upper bolster cover from the seat belt webbing.

6. Detach the seat belt retractor.
   Remove the Torx retaining screw.

7. Remove the seat belt assembly.
   Feed the seat belt webbing through the seat back.
Install

CAUTION:

When installing the seat belt make sure the webbing is correctly routed and not twisted. Make sure the seat belt operates correctly without restriction.

8. Refit the components in the reverse order.

540-03 Air Bags > < Belt And Stalk - Rear Seat - Left Or Right (17 Seat Bus) - Remove And Install (40 240 0)