ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Belt And Stalk - Rear Seat - Left Or Right (Triple) - Remove And Install (40 240 0) > < Belt And Stalk - Rear Seat - Left Or Right (Single) - Remove And Install (40 240 0)

Transit 1995 (08.1994-07.2000)

Stalk - Rear Seat (Centre Three Point) - Remove And Install (40 245 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

CAUTION:

Note the position of the spacers and paper washers. Make sure these are correctly positioned for installation.
1. Detach the upper seat belt anchor.
1. Remove the cover.
2. Remove the Torx retaining screw.

2. Detach the upper bolster cover.
   Lift the bolster cover from the seat.

3. Remove the seat bolster.
   Lift the bolster to detach the retainers.

4. Remove the seat belt stalk.
   Remove the Torx retaining screw from the underside of the seat.
Install

CAUTION:

When installing the seat belt make sure the webbing is correctly routed and not twisted. Make sure the seat belt operates correctly without restriction.
5. Refit the components in the reverse order.

Belt And Stalk - Rear Seat - Left Or Right (Triple) - Remove And Install (40 240 0) > < Belt And Stalk - Rear Seat - Left Or Right (Single) - Remove And Install (40 240 0)