ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Latch Assembly - Rear Door (Loadspace) - Remove And Install (41 627 0) > < Weatherstrip - Door Aperture - Replace (41 375 0)
Rear Door (Loadspace) - Remove And Install (41 615 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

1. Disconnect the battery earth lead.
2. Remove the D‐pillar trim panel.
   Six screws and two side trim clips.

3. Remove the D‐Pillar vent trim.
   One screw.

4. Disconnect the rear door wiring harness.
   Disconnect the multiplug at the vent aperture and displace the D‐pillar grommet.

5. Displace the door check strap.
   Pull out from the door.

6. Remove the door.
   With the assistance of another technician, remove the four hinge nuts.
Install

7. Refit the components in reverse order.

Latch Assembly - Rear Door (Loadspace) - Remove And Install (41 627 0) > < Weatherstrip - Door Aperture - Replace (41 375 0)