Ford Workshop Service and Repair Manuals

   Starting in the top corner, apply firm continuous pressure to the glass from inside the door.

   Lift the edge of the weatherstrip and carefully unclip the weatherstrip from the window flange, continuing around the window to remove.

   Position the ends of the cords so that they overlap at one of the bottom corners.

• Pass the cord ends through the aperture and engage the lower edges of the weatherstrip onto the aperture flange.

• Apply continuous pressure to the outside of the glass, and at the same time pull one end of the cord to lip the weatherstrip over the aperture flange.

• Continue until the window is fitted and check that the weatherstrip is correctly seated.