ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Glass - Fixed Rear Quarter Window - Remove And Install (42 514 0) > < Glass - Door Window - Front - Remove And Install (42 314 0)
Regulator Assembly - Door Window - Remove And Install (42 338 0)Transit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove
1. Fully lower the door window.

CAUTION:

Disconnect the battery negative lead.

2. Remove the door trim panel (refer to Operation Number 43 705 0).

CAUTION:

Do not touch the adhesive surface as re‐bonding will be impaired. Do not attempt to peel the water shield from the door without cutting the Butyl bead using a plastic knife.

3. Peel back the door insulation material.

4. Remove the remote control handle.

5. Remove the door window weatherstrip.
   Starting from the top edge, pull the complete weatherstrip from the door.

NOTE:

Wedge or support the window to stop it dropping.

6. Drill out the window regulator fixing rivets (manual winder shown).
Vehicles with powered windows only

7. Disconnect the powered window regulator multiplug.

NOTE:

Slide the regulator arm from the window glass bracket.

8. Remove the regulator assembly.
Install

NOTE:

Refit the window weatherstrip in the forward bottom corner.

9. Refit the components in reverse order.
   Refit the window weatherstrip starting in the forward bottom corner.

Glass - Fixed Rear Quarter Window - Remove And Install (42 514 0) > < Glass - Door Window - Front - Remove And Install (42 314 0)