| Removal and Installation Removal | | -
Disconnect the battery ground cable.
For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
| | | -
Remove the steering column upper shroud. - Using a thin bladed screwdriver, release the two clips (one each side).
- Remove the shroud.
| | | -
Using a thin bladed screwdriver, detach the audio remote control switch from the lower shroud. | | | -
Remove the audio remote control switch. | | | -
Remove the steering column lower shroud. | | | -
Disconnect the ignition switch electrical connector. - Depress the locking tang.
- Disconnect the ignition switch electrical connector.
| | | -
Remove the ignition switch. - Depress the locking tangs.
- Remove the ignition switch.
| Installation | | -
To install, reverse the removal procedure. | | |
