Transit Connect L4-2.0L (2010)
5. Use an alcohol wipe to clean the area around the wiring hole. Apply Motorcraft® Seam Sealer. (Figure 5)
6. Install the high mounted lamp, torque the nuts 22 lb-in (2.5 N.m), attach the wiring connectors.
7. Check the operation of the lamp.
8. Install the rear head liner.
Water Leak From Rear Cargo Doors (Figure 6)
1. If leakage is observed to be around the door striker area, vehicles built on or before 6/28/2010, adjust the strikers so that they move towards the front
of the vehicle ensuring that door seals fully to the seals on the body. (Figure 6 Area A)
2. If leakage is observed to be around the door flush-gap area. (Figure 6 Area B and/or C)
