Transit Connect L4-2.0L (2010)
14. If equipped, install the height adjust handle.
15. Install the recliner handle and screw.
16. If equipped, install the adjustable lumbar knob.
17. If equipped, install the armrest and spring retainer as noted in removal.
18. NOTICE: The head restraint guide sleeves are not interchangeable. Failure to install the correct head restraint guide sleeve at the correct
position may result in component failure.
Install the 2 head restraint guide sleeves.
-
Pull on the head restraint guide sleeves to make sure they are correctly locked to the backrest frame.
19. Install the head restraint.
-
Make sure the head restraint adjusts without excessive effort and locks in place. If binding occurs, inspect the head restraint guide sleeves for
damage and install new as needed.
20. Install the seat. For additional information, refer to Seat - Front See: Service and Repair/Front Seat.
