ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Glass, Frames and Mechanisms - Exploded View, Front Door|Page 5512 > < Glass, Frames and Mechanisms - Exploded View, Front Door
Page 1
background image

Front Door Window Glass Weatherstrip: Service and Repair
Door Glass Top Run - Front

Door Glass Top Run - Front

Removal and Installation

1. Lower the front door glass to the fully DOWN position.

2. Remove the exterior mirror assembly. For additional information, refer to Mirrors.

3. Remove the exterior door window weatherstrip.

-

Begin pulling up at rear edge of weatherstrip, and work along the remaining weatherstrip pulling straight up.

4. Remove the interior door trim panel.

5. Remove the interior door window weatherstrip.

6. Remove the watershield.

7. Remove the insulation pads.

8. Remove the quarter window glass division bar lower retaining screw.

-

To install, tighten to 10 Nm (89 lb-in).

Glass, Frames and Mechanisms - Exploded View, Front Door|Page 5512 > < Glass, Frames and Mechanisms - Exploded View, Front Door