Transit Connect L4-2.0L (2010)
Brake Caliper: Service and Repair
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal and Installation
1. Remove the brake pads. For additional information, refer to Brake Pads See: Brake Pad/Service and Repair/Brake Pads.
2. Remove the 2 bolts and the brake caliper anchor plate.
-
To install, tighten the bolts to 133 Nm (98 lb-ft).
3. To install, reverse the removal procedure.
-
Apply brakes several times to verify correct brake operation.
