Transit Connect L4-2.0L (2010)
NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or
plastic surface, immediately wash the surface with water.
1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.
2. Disconnect the brake flexible hose fitting from the brake caliper.
-
To install, tighten bolt to 14 Nm (124 lb-in).
3. Disconnect the brake tube fitting from the brake flexible hose.
-
To install, tighten to 17 Nm (150 lb-in).
4. Remove the brake flexible hose retaining clip and the brake flexible hose.
5. To install, reverse the removal procedure.
-
Make sure the holding feature on the brake flexible hose is aligned with the notch on the brake caliper.
-
Bleed the brake caliper. For additional information, refer to Component Bleeding in Brakes and Traction Control.