Transit Connect L4-2.0L (2010)
3. NOTE: Check the seating of the valve collet.
Using the Valve Spring Compressors, install the valve spring.
-
Insert the valve spring and the valve spring retainer.
-
Compress the valve spring and install the valve collet using some multi-purpose grease and a small screwdriver.
4. Disconnect the compressed air supply.
5. Repeat the appropriate removal and installation steps for all of the other cylinders.
6. Install the spark plugs. For additional information, refer to Ignition System.
7. Coat the valve tappets with clean engine oil and insert them.
8. Install the camshafts. For additional information, refer to Camshafts See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal
and Replacement/Camshafts.