Transit Connect L4-2.0L (2010)
-
Tighten to 10 Nm (89 lb-in).
-
Remove the paper clip to release the piston.
10. NOTICE: The Camshaft Alignment Plate is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine
damage.
Using the flats on the camshafts to prevent camshaft rotation, tighten the camshaft drive gear bolts.
-
Tighten to 72 Nm (53 lb-ft).
11. Install the front cover. For additional information, refer to Engine Front Cover See: Timing Cover/Service and Repair.